1. SLATS
Aluminum alloy 6011
Heat treated and spring tempered (except 5000 series alloy on metallized finishes)
1" x .008" thick before painting
FINISHES-WITH DUST SHIELD
1) Painted solid colors
2) Metallic finish with clear coat
3) Brushed
FINISHES-WITHOUT DUST SHIELD
1) Perforated (hole size .022"; approximately 7% openness factor)
2. HEADRAIL
1 3/8" x 1 3/8" x .024" steel, corrosion resistant
U-shaped profile with rolled edges
Sleek beveled edge
Baked-on polyester finish to match slats
3. HEADRAIL END CAPS
Available with hidden bracket
Engineering polymer
Color-coordinated to match headrail
4. END LOCKS
Used with box brackets
.024" steel - Each lock with adjustable tab for centering blinds
5. TILTER
Die-cast worm and gear type
Clutch action to protect ladder tapes
Permanently lubricated gear mechanism in fully enclosed housing
Control position options:
1) Tilter at left, cordlock at right (standard)
2) Tilter at right, cordlock of left
3) Tilter and cordlock right (requires 6" end rout) 4) Tilter and cordlock left (requires 6" end rout) limited tilt options available with 1) and 2) above
6. TILT WAND
Extruded clear acrylic, ribbed for positive grip
7/16" diameter, tubular shape
Detachable without tools
7. TILT ROD
Solid steel, corrosion-resistant finish
8.CORDLOCK
Steel with corrosion-resistant finish
Crashproof locking device
Cordlock adapter (8A) and lift cord separator (8B) included
9. BOTTOM RAIL
Steel, with corrosion-resistant finish
Baked-on polyester paint color-coordinated to slats
Formed with doubled-lock seam into closed oval shape for optimum beam and torsional strength
End caps (9A)
Accepts hold-down pins (98) and brackets (9C) to secure bottom rail to jamb or sill
10. BRAIDED LADDERS
100% polyester yarn color compatible with slats
Spacing of ladder no more than 20mm, approximately 15.2 slats per foot of drop
11. LIFT CORDS
Two-ply polyester cord filler
Braided polyester jacket
12. LADDER TAPE ECCENTRIC
Engineering polymer
13. TAPE ECCENTRIC SUPPORT
Self-lubricating engineering polymer with large 1/8" radius to reduce lifting forces
14. TAPE BUTTONS
15. BOX BRACKETS
.042" steel
Baked-on polyester finish to match headrail
15A. HIDDEN BRACKETS (option)
.070 steel, bright zinc coated
Blinds of 60" wide with three hidden brackets (maximum spacing 60")
Extension brackets (15B and 15C) are available
16. BREAK-THRU SAFETY TASSEL
Fracture-resistant, color-coordinated polymer
Break-apart feature to help protect children and pets from injury
Tassel designed for two, three or four cords
Tassel halves fasten securely to two lift cords
DESIGN OPTIONS
- MODEL CD60 (.006" slat and 20mm spacing)
- MODEL CD62 (.006" slat and 22mm spacing)
- MODEL CD82 (.008" slat and 20mm spacing)
- MODEL CD88 (.008" slat and 18mm de-light, spacing.)
 | ||||||||||||||||||
|