Commercial Hardwood Blinds

1. SLATS
Quality selected hardwood
Stained and lacquered to a son finish or painted
Nominally 2" wide x 1/8" thick
Slat ends stained or painted to match slat color
2. HEADRAIL
.024" steel, corrosion resistant
1 ½" x 2 ¼" U-shaped profile with rolled edges at top
Polyester, baked-on finish coordinates with slats
3. BOTTOM RAIL
Quality selected hardwood
Stained and lacquered or painted to match slats Nominally 2" wide x 5/8" thick
Ends stained or painted to match slots
4. TILTER (2" only)
Cord tilt standard
Fully enclosed and permanently lubricated
Holds and tilts slats at any angle
Control position options:
1) Tilter at left, cordlock at right (standard)
2) Tilter at right, cordlock at left
3) Filter and cordlock at right (requires 6" end rout)
4) Tilter and cordlock at left (requires 6" end rout)
Wand all (4A) also available
Worm and gear construction
Slip clutch incorporated into tilter mechanism

5. TILT WAND (when wand tilt is specified)
Extruded PVC for all finishes
3/8" diameter
Detachable without tools Color coordinated to match slats
6. TILT ROD
Solid cold-rolled steel
Corrosion-resistant finish
7. TILT ROD SUPPORTS
Self-lubricating engineering polymer
8. END LOCKS
Zinc-coated steel
Each lock has adjustable tab for centering blind
9. TAPE LOCKS
Color coordinated
10. LADDER OPTIONS:
String tapes
1) 100% braided, polyester yam
2) Horizontal rungs inter-braided with vertical cables
Cloth tapes
1) High strength poly/cotton blend webbing
Tapes spaced to comply with Hunter Douglas standards for size and weight of blind 11.CORDLOCK
Engineering polymer and galvanized steel housing
Polymer roller bearing and steel locking dogs
12. LIFT CORD
Two-ply polyester cord filler
Braided polyester jacket
Designed to meet or exceed Commercial Item Specification 1029.86
13. LADDER TAPE ECCENTRIC & TAPE ECCENTRIC SUPPORT (13A)
Die-cast metal for optimal strength
14. INSTALLATION BRACKETS
.030" steel
Blinds over 84" wide have intermediate support brackets of U-shaped of swivel design (14A) with
maximum spacing 72"
Extension brackets (14B and 14C available
15. BREAK-THRU" SAFETY TASSEL
Fracture-resistant polymer color-coordinated to blind
Break-apart feature to help protect children and pets from injury
Tassels designed for two, three or four cords
Tassel halves fasten securely to two lift cords
16. VALANCE
Crafted of selected hardwoods Stained and lacquered or painted to match slats
Accent ribs at top and bottom
Outside valances are miter-cut and glued, attached with on extruded fastening profile, fixed to back of valance and clipped to headrail

DESIGN OPTIONS
1" Commercial Hardwood Blind (1" x 1 ½"x .024" headrail)
Two blinds on one headrail option available


Please consult your Hunter Douglas representative for specifications on 1" blinds