Model CE61 1" Mini Aluminum Blinds

1. SLATS
     • Aluminum alloy 6011
     • Heat treated and spring tempered (except 5000 series alloy on metallic finishes)
     • 1” wide x .006” thick before painting
  FINISHES-WITH DUST SHIELD^TM - Painted solid colors - Metallic finish with clear coat
2. HEADRAIL
     • 1” x ½”x .024” steel corrosion-resistant
     • Formed into a U-shaped profile with rolled edges
     • Baked-on polyester finish to match slats
3. TILTER
     •Die-cast worm and self-lubricating gear
     •Clutch action to protect ladder lopes
     •Fully enclosed in polymer housing
     •Control position options:
        1)Tilter at left, cordlock at right (standard)
        2)Tilter at right, cordlock at left
        3)Tilter and cordlock right (requires 6” end rout)
        4)Tilter and cordlock left (requires 6” end rout) limited tilt options available with 1) and 2) above.
4. TILT WAND
     •Extruded, clear acrylic, ribbed for positive grip
     • 7/16” diameter tubular Shape Detachable without tools
5. TILT ROD
     • Solid steel
     • Corrosion-resistant finish
6. SCROLOCK
     •Steel with corrosion-resistant finish
     •Crash-proof locking device         
     •Right hand only for two-position cordlock
7. BOTTOM RAIL
     • Steel, corrosion-resistant 
     • Baked-on polyester point color coordinated to slats 
     • Formed with double-look seam into closed oval shape for optimum beam and torsional strength 
     •Thermoplastic end caps (7A) 
     •Accepts hold-own pins (78) and brackets (7C)
8. END LOCKS  
     • .030” steel 
     • Each lock with adjustable tab for centering the blinds
9. BRAIDED LADDERS  
     • 100% polyester yarn color compatible with slots 
     • Spacing of ladders no more than 22mm, approximately 13.8 slat per foot of drop
10. LIFT CORDS 
     • Two-ply polyester cord filler 
     • Braided polyester jacket
11. LADDER TAPE ECCENTRIC  
     • Engineering polymer  
12. TAPE ECCENTRIC SUPPORT  
     • Engineering polymer 
     • Self-lubricating to reduce lift forces
13. TAPE BUTTONS  
     • Color coordinated  
14. INSTALLATION BRACKETS  
     •End brackets of .042' steel with polyester baked-on finish to match headrail 
     •Blinds of 60' wide have intermediate support brackets (14A), with maximum spacing 60”. 
     •Extension brackets (14B and 14C) available.
15. BREAK-THRU® SAFETY TASSEL 
     •Fracture-resistant, color-coordinated  polymer 
     • Break-apart feature to help protect children and pets from injury 
     • Tassels designed for two, three or four cords Tassel halves fasten securely to two lift cords
DESIGN OPTIONS 
     •CE60 (.006” slat and 20mm spacing) 
     •CE80 (.008” slat and 20mm spacing) 
     •CE81 (.008” slat and 22mm spacing)
Please call CSS for more information about these design options